Modern Metal Fences
Modern metal fences made of welded panels, welded mesh or chain-link mesh are not only reliable protection of the fenced area, but also its decoration - the unobtrusive design of a modern fence fits well into any landscape - whether it be a park, square, sports ground or adjacent to a residential home territory. The design of a modern metal fence allows, without any modifications, to equip it with a spiral fence made of Egoza razor wire or a Concertina wire barrier, which significantly increases the reliability of protecting the fenced area from the penetration of unwanted entities. In this form, a metal fence can be used to protect not only ordinary objects, but also those that require more reliable protection.
For especially important objects that require increased attention to security, metal fences made of chain-link mesh are well suited. Powerful poles with spacers, a solid concrete foundation around the entire perimeter, a large-section wire mesh with spikes along the upper and lower edges, additional wire guides stretched along the fence canvas - all this provides the maximum degree of protection when using such a fence. All elements of the reinforced structure fence are galvanized and additionally coated with a protective polymer coating. Such fences are highly reliable and well protect the territory from possible intruders and, in addition, are reliably protected from the influence of the atmosphere and have a long service life even in difficult environmental conditions.
Welded Panel Fence
Welded panel fence is a versatile fence and consists of welded panels mounted on metal poles. Typically, welded fence panels have a standard width of 2.5 meters, and their height can range from half a meter to two and a half meters. For the installation of such a fence, rectangular posts are used with a section of 40x60 or 80x60 mm, and the welded panel is a lattice with a cell of 50x200 mm. Welded panel fence posts are available with either a square base for anchoring or with an extension to be embedded in a concrete foundation. The fence is assembled using fasteners of a special design, which firmly and securely hold the metal fence assembly.
The surface of the metal grating after welding is galvanized and coated with a protective polymer coating to protect it from the influence of atmospheric factors and give color. The surface of the fence posts is coated with a protective zinc or polymer coating both inside and out. A wide range of colors of metal fences made of welded panels is available for sale. Typically, companies that produce and sell fences from welded panels also carry out the entire cycle of work on its installation - from designing a fence or fence structure to assembling and fence installing at a customer's site.
Special Chain-Link Fence
There are objects for which fencing with a conventional fence is not enough - the security requirements are too high. In this case, it is recommended to use special metal chain-link fences, which provide a high level of protection of the fenced area from unauthorized entry.
The design of such a fence is quite complex, which ensures the effectiveness of its use. A fence of this type is installed on a solid concrete foundation, which stretches along the entire perimeter of the fenced area. The fence posts are made of thick-walled large diameter pipe, and extra spacers are used to support the corner, support and end fence posts. A continuous, without joints, web of woven mesh of large-section wire is attached to the posts, the upper and lower edges of the mesh end in rows of sharp spikes formed by twisted strands of steel wire. Additional strength and reliability of the structure of the reinforced fence is provided by guides made of thick wire stretched in several rows with the help of special devices, to which a mesh is attached at small intervals. The mesh is also attached at small intervals to the concrete foundation of the fence.
It should be noted that all elements of the fence - poles, wire, mesh, tension devices, hardware - are covered with a multi-layer protective coating - after welding, they are first galvanized and then covered with a polymer layer. Such a coating provides reliable protection against the influence of natural factors, does not allow corrosion to destroy metal and allows the fence to be operated for a long time without any maintenance, without compromising the safety level of the fenced object.